師資
朱強，1994年畢業于德國愛爾蘭根-紐倫堡大學（Universit?t Erlangen-Nürnberg）材料科學專業，獲工學博士學位；曾任北京有色金屬研究總院副總工程師、首席專家、學術委員會委員、國家有色金屬復合材料工程技術研究中心副主任、北京市金屬先進成形技術中心首創主任，科技部十二五《高品質特殊鋼和高溫合金》總體專家組專家。現為英國材料、礦業與礦物學會會士，第十五屆國際半固態技術委員會主席，中鑄協半固態技術工作委員會主任委員。先后參與或主持法國科學中心中法合作項目、德國國家自然基金項目、英國國家自然基金重點項目、英中國際合作項目以及康明斯全球渦輪增壓器關鍵部件壓葉輪和渦輪的壽命改進項目。近5年先后承擔國家科技支撐、國際合作、重點研發計劃以及省市等縱向科研項目和企業合作橫向項目，總經費超億元人民幣。受邀多次在國際著名學術會議上作特邀報告，發表論文190余篇，編輯出版專著2本，專利62項。
所獲榮譽：
◆ 深圳市科技進步一等獎，2022
◆ 英國材料、礦業與礦物學會會士，2021
◆ 中國有色金屬協會/學會科學技術獎一等獎，2020
◆ 深圳市“鵬城學者”特聘教授，2018
◆ 國際合金及復合材料半固態加工技術杰出貢獻獎，2018
◆ 深圳市海外高層次人才“孔雀計劃”A類，2017
◆ 深圳市南山區“領航人才”，2017
◆ Advances in Engineering評選 “關鍵科學論文獎”，2015
◆ 北美國際半固態/擠壓鑄造大獎，2009
◆ 康明斯技術創新獎“Semi-Solid Moulding of Impellers”，2006
◆ 康明斯技術創新獎“Resolution of HX82 Impeller Slinger Boss LCF”，2004
◆ 中國金屬學會優秀論文獎 “Phase interface segregation of magnesium in a nickel-base superalloy”，1988
科研成果：
◆ 發表論文190余篇，編輯出版專著2本，專利62項；
◆ 主持國家重點基礎材料、“863”、科技支撐、國際合作等項目或課題；
◆ 獲批“北京市金屬先進成形制造工程技術研究中心”.
◆ 獲批深圳市重點實驗室
◆ 獲批深圳市孔雀團隊項目資助
代表論文：
1. Yuhe Huang*, Everth Hernandez-Nava, Xiaogang Hu, Iain Todd, Qiang Zhu*. Unusual martensitic strain accommodation mechanism in an electron beam processed metastable β-Ti alloy. Scripta Materialia, 2023, 223:115069
2. Junheng Gao, Yuhe Huang, Xiaogang Hu, Shuize Wang*, W. Mark Rainforth, Iain Todd, Qiang Zhu*. An alternative formation mechanism of {332} BCC twinning in metastable body-centered-cubic high entropy alloy. Scripta Materialia, 2022, 217:114770
3. Gan Li, Yuhe Huang, Xinwei Li, Chuan Guo, Qiang Zhu*, Jian Lu*. Laser powder bed fusion of nano-titania modified 2219 aluminium alloy with superior mechanical properties at both room and elevated temperatures: The significant impact of solute. Additive Manufacturing, 2022, 60:103296
4. Chuan Guo, Gan Li, Sheng Li, Xiaogang Hu, Hongxing Lu, Xinggang Li, Zhen Xu, Yuhan Chen, Qingqing Li, Jian Lu*, Qiang Zhu*. Additive manufacturing of Ni-based superalloys: Residual stress,mechanisms of crack formation and strategies for crack inhibition. Nano Materials Science, 2022, xx:xx
5. Wenying Qu, Juan Chen, Zhong Li, Min Luo, Hongxing Lu, Xiaogang Hu*, Qiang Zhu*. Rheological modeling and simulation of semi-solid slurry based on experimental study. Scripta Materialia, 2022, 220:114932
6. Chuan Guo, Zhengrong Yu, Xiaogang Hu, Gan Li, Fan Zhou, Zhen Xu, Shuang Han, Yang Zhou, R. Mark Ward*, Qiang Zhu*. Y2O3 nanoparticles decorated IN738LC superalloy manufactured by laser powder bed fusion: Cracking inhibition, microstructures and mechanical properties. Composites Part B, 2022, 230: 109555
7. Xinwei Li, Gan Li, Ming-Xing Zhang, Qiang Zhu*. Novel approach to additively manufacture high-strength Al alloys by laser powder bed fusion through addition of hybrid grain refiners. Additive Manufacturing, 2021, 48: 102400
8. Chuan Guo, Yang Zhou, Xinggang Li, Xiaogang Hu, Zhen Xu, Enjie Dong, Qiang Zhu*, R. Mark Ward*. A comparing study of defect generation in IN738LC superalloy fabricated by laser powder bed fusion: Continuous-wave mode versus pulsed-wave mode. Journal of Materials Science & Technology, 2021, 90:45-57.
9. Xinwei Li, Shi Shi, Shuang Han, Xiaogang Hu, Qiang Zhu*, Hongxing Lu, Wenwu Li, Yusheng Shi, Hui Ding. Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting. Additive Manufacturing, 2020, 34: 101326.
10. Chuan Guo, Zhengrong Yu, Chang Liu, Xinggang Li, Qiang Zhu*, R. Mark Ward*. Effects of Y2O3 nanoparticles on the high-temperature oxidation behavior of IN738LC manufactured by laser powder bed fusion. Corrosion Science, 2020, 171:108715.
11. X.G. Hu, Q. Zhu*, H.V. Atkinson, H.X. Lu, F. Zhang, H.B. Dong, Y.L. Kang. A time-dependent power law viscosity model and its application in modelling semi-solid die casting of 319s alloy. Acta Materialia, 2017, 124:410-420.
12. X.G. Hu, Q. Zhu*, S.P. Midson, H.V. Atkinson, H.B. Dong, F. Zhang, Y.L. Kang. Blistering in semi-solid die casting of aluminium alloys and its avoidance. Acta Materialia, 2017, 124:446-455.